Welcome: ChengYan Electronic Technology Co.Ltd. 请选择您的语言:
Language: Chinese ∷  English

NT6800WNR 6 DO 220V Relay 8 DI input Modbus TCP network IOT Wifi LAN power switch

NT6800WNR - 6 DO 220V relay 8 DI input Modbus TCP network IOT Wifi LAN power switch

Introduction

NT6800WNR has 6 relays, 8 isolated input. Communicate by rj45 network or Wi-Fi, supports Modbus-TCP.

( NT6800WNDSR: with one DS18B20 temperature sensor in addition

It can be controlled by PLC / computer / android, suitable for industrial automation, data acquisition systems, environmental monitoring and local control of an electrical and non-electrical parameter, building automation etc.

Key components:  HLK-RM04 serial network module, STM8S105K4T6C, HR911105A, supports secondary development.

6 do relay 8 di input network switch.jpg

6 relay 8 input wifi switch.jpg

How to use network relay made by nitwo tech? It’s easily by 3 steps:

Step 1: Power on the NT6800WNR module with 12-24VDC.

Step 2: Search the SSID of hi link network module rm04 with Wi-Fi dhcp mode.

SSID of hilink network module rm04.JPG

Step 3: Run android app or .exe file of computer and connect with IP:192.168.16.254 port: 8080

6 io android control.jpg

NT6800WNR app apk and .exe software download linkNT6800WNR.rar

Features

> 10/100 Mb Ethernet connectivity;
> Auto-MDIX;
> 8 digital isolated inputs,8 input + with one COM-;

6io module input DI.JPG

> 6 relay outputs Type: with NO and NC contacts;

Contact current rating: 10 A @ 30 VDC/250 VAC (resistive load)

Initial insulation resistance: 100 mega-ohms (min.) @ 500 VDC

Minimum pulse output of relay: 2 Hz at rated load

> SMA Wi-Fi male pin socket adapter for antenna or adaptor for extension cable.
> 35mm DIN Rail fixed
> Working voltage:     12 to 24V wide voltage input
> Working current:      0.3~0.5 A ( all relays ON)
> Plug-able high current terminals, convenient for wiring and changing position

high current terminals.jpg


How to setup IP address and Network parameter of hlk-rm04 serial network/wireless module?

HLK-RM04 module working mode can be divided into:

> Serial to Wi-Fi AP
> Serial to Wi-Fi CLIENT
> Serial to Ethernet

Using a web browser for configuring the HLK-RM04 communication mode (Wi-Fi or Lan) and IP easily.

Serial to Wi-Fi AP.JPG

Protocol

  • MODBUS-RTU Function:

Coil status (01), input status (02), input and coil registers (03), Force Single Coil (05), Preset Single Register (06).

wifi relay Modbus 05 function sample .jpg

  • Client’s proprietary protocol support also (customized for client of      NiTwo tech) example:

Simple protocol specification.jpg


CRC 0x68 = 0x55 + 0x01 + 0x12 + 0x00 + 0x00 + 0x00 + 0x00

Operating mode configuration switch description (able to custom as client's need)

instrument panel membrane film of NT6800.jpg


 

S1 OFF: All relay state is off when power on (all open mode).

S1 ON: All relay states before power off can be logged in internal flash memory, for next time power on they will active same as the last time (memory mode).

S2 OFF: Relay is able to active sync with digital DI input, example input 1 availed the relay 1 availed also, only be controlled locally by DI (sync mode).

S2 ON: Relays can be activated either remotely PLC/Computer (MODBUS Master) or locally by digital DI input (pulse mode).

S3 OFF: Relay will active with digital DI input changing (Sync or Pulse mode, optional by dial dip-switch S2) (Linked mode).

S3 ON: Relay is able to configure to no relation with digital DI input, example input 1 availed but the relay 1 doesn’t availed (unlinked mode).

S4 OFF: Accessed by upper Master PLC/Computer (check mode).

S4 ON: Initiative to report the DO DI states to upper Master PLC/Computer (report mode).

 

SENSOR: Connect to temperature sensor or temperature humidity sensor.

Power-LED: Power is ON

Wi-Fi-LED: Blinks when Wi-Fi working mode

Lan-Link-LED: Blinks when LAN working mode


NT6800WNR mounting and size.JPG




No previous NEXT:Wi-Fi 4IO Modbus-TCP module

CATEGORIES

CONTACT US

Contact: Mr.Ken

Phone: +86-134_5678_6217

Tel: +86-134_5678_6217

Email: ken@nitwo.com

Add: East side of No.10 factory building, Xinghua Industrial Park, No.2 Shuangma street, Suzhou Industrial Park

Scan the qr codeClose
the qr code